Everything about Forceps totally explained
Forceps are a handheld, hinged instrument used for grasping and holding objects. Forceps are used when fingers are too large to grasp small objects or when many objects need to be held at one time while the hands are used to perform a task. The term forceps is used almost exclusively within the medical field. Outside medicine, people usually refer to forceps as
tweezers,
tongs,
pliers,
clips or
clamps.
The singular and plural form of forceps is always forceps, never 'forcep.' Nor is it referred to as a "pair of" as one refers to a pair of scissors. Etymologically, the word derives from the Latin 'Forca,' meaning a
snare or
trap.
Most forceps births are straightforward, although there may be some soreness and bruising afterwards. There is a small risk of permanent damage to the bladder or back passage. The risk of injury is greater with forceps than with ventouse delivery as are reports of severe pain in the perineum 24 hours after delivery. The baby may be slightly bruised; this generally clears up in a few days. Very occasionally the facial nerve is damaged, causing a palsy, so that the baby's mouth droops at one corner, this is usually temporary.
Mechanically, forceps employ the principle of the
lever to grasp and apply pressure.
Surgical forceps are commonly made of high-grade
carbon steel. Lower quality steel is used in forceps made for other uses. High carbon steel ensure that the instruments can withstand repeated
sterilization in high-temperature
autoclaves. Some forceps, intended to be used once and then discarded, are made of plastic.
There are two basic types of forceps: non-locking (often called 'thumb forceps' or 'Pick-ups') and locking, though these two types come in dozens of specialized forms for various uses. Non-locking forceps also come in two basic forms, hinged at one end, away from the grasping end (colloquially such forceps are called tweezers, though a medical professional wouldn't likely refer to them a such) and hinged in the middle, rather like scissors (though, unlike scissors, forceps meet on flat, grasping surfaces rather than in interposing blades). Locking forceps are almost always hinged in the middle, though some forms place the hinge very close to the grasping end. Locking forceps use various means to lock the grasping surfaces in a closed position to facilitate manipulation or to independently clamp, grasp or hold an object.
Thumb forceps
Thumb forceps are commonly held between the thumb and two or three fingers of one hand, with the top end resting on the
anatomical snuff box at the base of the thumb and index finger. Spring tension at one end holds the grasping ends apart until pressure is applied. This allows one to quickly and easily grasp small objects or tissue to move and release it or to grasp and hold tissue with easily variable pressure. Thumb forceps are used to hold tissue in place when applying sutures, to gently move tissues out of the way during exploratory surgery and to move dressings or draping without using the hands or fingers.
Thumb forceps can have smooth tips, cross-hatched tips or serrated tips (often called 'mouse's teeth'). Common arrangements of teeth are 1x2 (two teeth on one side meshing with a single tooth on the other), 7x7 and 9x9. Serrated forceps are used on tissue; counter-intuitively, teeth will damage tissue less than a smooth surface (you can grasp with less overall pressure). Smooth or cross-hatched forceps are used to move dressings, remove sutures and similar tasks.
Adson tissue forceps
Note the 1x2 "mouse's teeth" on the lower tip.
Locking forceps
Locking forceps, sometimes called clamps, are used to grasp and hold objects or tissue. When they're used to compress an
artery to forestall bleeding they're called hemostats. Another form of locking forceps is the needle holder, used to guide a suturing needle through tissue. Many locking forceps use finger loops to facilitate handling (see illustration, below, of Kelly Forceps). The finger loops are usually grasped by the thumb and middle or ring fingers, while the index finger helps guide the instrument.
The most common locking mechanism is a series of interlocking teeth located near the finger loops. As the forceps are closed, the teeth engage and keep the instrument's grasping surfaces from separating. A simple shift of the fingers is all that's needed to dis-engage the teeth and allow the grasping ends to move apart. Forceps are also used for surgery.
Kelly forceps
Kelly forceps (also known as Mosquito or Rochester forceps) are a type of
hemostat usually made of stainless steel. They resemble a pair of
scissors with the blade replaced by a blunted grip. They also feature a locking mechanism to allow them to act as clamps. Kelly hemostats are distinguished from the
crile variety, in part, by their
cross-hatched grip pattern, as opposed to a simple system of grooves.
Kelly forceps may be floor grade (regular use) and as such not used for
surgery. It may also be sterilized and used in operations, in both human and
veterinary medicine. They may be either curved or straight. In surgery, they may be used for holding off
blood vessels or tissues, as general purpose clamps, or for assorted other purposes.
The name comes from its original manufacturer.
The "Mosquito" variant of the tool is more delicate and have smaller, finer tips. A similar tool is the
Carmalt, which is heavier and longer.
Forceps in childbirth
Forceps can be used to assist the delivery of a
baby as an alternative to the
ventouse method. See
forceps in childbirth.
Further Information
Get more info on 'Forceps'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://forceps.totallyexplained.com">Forceps Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |